AIPA | Wrecking Ball Surfboard | Surftech Fusion HD | Speed and Bashing Sections

The Wrecking Ball design comes from an experimental shortboard design Ben Aipa worked on in 1977. A full nose and broad outline in the front half of the board meet an unmistakable Aipa wing near the back third of the board, where the outline curves in a tight radius untill it hits a multi-pronged experimental tail. Ben’s futuristic outline packs a ton of board into a short package. The resulting increase in volume gives the Wrecking Ball extra float for faster paddling and a feeling of “unsinkableness” even the meanest of flat spots can’t sink. Updated with high-performance bottom contours by Ben’s son Duke the wrecking ball features a transitional bottom that fades from a rolled nose to a single concave in the middle of the board to a double concave under the fins and finishes with a vee out the tail. To make the most of the Wrecking Ball’s down-the-line drive and allow riders to harness control of the extra speed this board generates, we’ve opted for a quad fin setup. The result is a high-performance super groveler that blends classic design, experimental innovation, and modern sensibilities into a surfboard that drives down the line with unparalleled speed and bashes through sections without remorse. Feel the power of The Wrecking Ball!

Fins Not Included. Use code "boarddeal" at checkout to save some $$ on a new set. 

Wave range: Below average to above average/ waist high to overhead.

Use in conditions you would either use a groveler or ditch your shortboard on good days for a new sensation.

Fin Configuration: Quad on average basis to overhead, switch to thruster for over head high for added holding power..

Design Range: 5’0” to 6’4”

Target Sizing: 2-5” below standard shortboard with 1-3 L added volume depending on skill level.

Watch The AIPA Wrecking Ball Video

FREE Surfboard Delivery*

FREE DELIVERY TO BRISBANE, SUNSHINE COAST, GOLD COAST, SYDNEY CBD and Melbourne CBD ONLY.*Remote locations, and regional locations like TAS, WA, NT, SA, ACT will incur additional shipping costs. Surf Shops Australia will advise you of any additional costs & you are welcome to proceed or cancel your order. Surfboards cannot be delivered via Australia Postage. In-stock surfboard items, allow 1-2 days for careful packaging and couriers to collect from our warehouse. Express Australia Post is not available for bulky items like boards, board covers and heavy items. All orders will be confirmed over the phone or email to finalise details.

Surftech Fusion HD Construction

1. Fused Cell EPS Core // Closed-cell EPS core provides more response + flotation
2. Clear HD-Epoxy Resin // Epoxy resin system with high thermo-mechanical performances
3. High Quality E-Glass Fiberglass // E-glass has the highest strength-to-weight ratio available
4. Full Biax Deck Patch (45° / -45°) // The Biax fiberglass distributes power + protects from dings
5. UD Carbon Stringer or Wood Stringer // Distributes power + adds pop + adds break strength
6. FCS II or FUTURES Fin Boxes // Takes just seconds to insert and remove the fins
7. Hand-Finished // Machine-shaped, hand-laminated, and hand-finished